Specialist Suppliers of 
Industrial Controls

Capacitance Probe MK-2 / MK-2e

Capacitance Probe MK-2 / MK-2e
Product Description
Review and Rating
Resources
Capacitance Probe MK-2 / MK-2e

TrueCap® RF capacitance sensors offer cost-effective point level monitoring with reliability you can count on. Monitor’s complete line, which features models MK-2 and MK-2e, provides you with the most affordable solution for your application. Monitor’s RF capacitance probes are designed to provide a high level of sensitivity, stability and durability for powder and bulk solids applications, as well as liquid and slurry applications. Monitor’s two-year warranty stands behind every TrueCap sensor..: Principle of Operation  .: Applications  .: Model Selection 
   

Principle of Operation  
A radio frequency is applied to the probe and is continually analyzed to determine the influence caused by the surrounding environment. As material contacts the probe, the radio frequency shifts indicating an increase in capacitance (C). The active probe of the unit and the vessel’s wall make up the two plates (A=area) of a capacitor which are separated by a fixed distance (d). The probe’s insulator and surrounding air provide the dielectric material (with dielectric constant “K”). As the air (K=1.0) is displaced with any other material (K > 1.0), the capacitance effect (C) is enhanced, thereby changing the application’s impedance. This influence is measured within the circuitry and compared to a reference established by the sensitivity setting. The setting determines how much influence must be present before the output changes. The driven shield section of the probe enables the circuitry to ignore product build-up on the probe that would otherwise cause false sensing. The driven shield is activated with the same radio frequency potential as the sensing probe. Since current can not flow between identical potentials, the driven shield blocks current flow from the active probe to the vessel wall through the material build-up, thereby eliminating the sensing of the material build-up.  

 

Features  
- The TrueCap® Model MK-2e RF capacitance point level sensor is a reliable sensor and is a standard for many OEMs and end users requiring versatility and lower cost.    Superior 0.5 pF sensitivity ensures reliability
- Build-up immunity helps eliminate false signals
- High intensity LED indicating light (Ordinary location integral sensors only)
- Available hazardous location approvals with intrinsic safety
- Simple 2-step manual calibration
- Economical

 

Applications    
TrueCap® RF capacitance point level sensors are versatile devices providing high and low level readings in bins, silos, tanks, hoppers, and other vessels. TrueCap’s superior sensitivity range allows users to properly adjust units to meet the needs of a wide variety of applications. Whether your application is for a powder, liquid, granular solid, or viscous material, the TrueCap product line offers the right solution.

Typical Applications include, but are not limited to:

Chemicals  Plastics  Pellets 
 Feed / Grain  Rubber  Pharmaceuticals
 Liquids  Wastewater  Sand
 Food  Slurries  Cement
 Powders  Paint & Coatings  Coal
 Granular Solids  Oils  Paper Pulp