Specialist Suppliers of 
Industrial Controls

STF FMA1000 Metallic Self Cleaning Filter

STF FMA1000 Metallic Self Cleaning Filter
Product Description
Review and Rating
Resources
STF FMA1000 Metallic Self Cleaning Filter

FMA 1000 - Hydraulic
Filters specially designed for low water flows and used at installations without electrical energy. Low water consume during self-cleaning process due to our suction nozzles with brushes system. During the flushing process, the water will continuously be filtered and will be flowing to the application system assuring us a continuous working. Exists the possibility of grouping filters and be controlled by the same programmer.

Dimensions:



Equipment features
- Construction materials:
- Body filter : Carbon steel (Other options: Stainless steel)
- Screws : stainless steel AISI-304
- Stainless steel screen AISI-316
- Filtering Cartridge support in PVC or in stainless steel
- Surface Treatment:
- Graned surface to a roughness of SA 2 ½
- Covering with paint EPOXI-POLIESTER Powder
- Controller with batteries for self-cleaning process
- Minimum working pressure: 2,5 bar
- Maximum working pressure : 10 bar
- Standard filtration degrees: 125, 500, 1000 microns (For other options, consult)
NOTE: values for cartridge of 125 micron. For other filtration degree consult the manufacturer
____________________________________
Recommendations for the installation
A retention valve may be installed if exists the possibility of flow changes or water hammer. A butterfly valve at water in and out may be installed for easy maintenance.
If filtered water comes out at atmospheric pressure, it will be necessary to install a valve for maintain inside the filter 2 bar pressure.


FMA 1000E - Electric
Flow m3/h for a 125 microns screen
Model High Quality Medium Quality Low Quality
PVC Cartridge Stainless Steel Cartridge PVC Cartridge Stainless Steel Cartridge PVC Cartridge Stainless Steel Cartridge

Dimensions:



Equipment features
- Construction materials:
- Filter body : Carbon steel (Other options: Stainless steel)
- Screws : double chrome, quality 5.6 et 5.8
- Stainless steel screen AISI-316
- Cartridge in PVC or in stainless steel
- Surface Treatment:
- Graned surface to a roughness of SA 2 ½
- Recovering with paint in EPOXI-POLIESTER powder
- Operating voltage : monophase 220 v (50 Hz)
- Electrical motor power ¼ CV
- Control panel with screen display relay (optionally PLC with touch screen, connection to SCADA system , etc.)
- Minimum working pressure: 2 bar
- Maximum working pressure : 10 bar (For other options, consult)
-Standard filtration degrees: 20, 34, 63, 75, 100, 125, 200, 500, 1.000, 1.500, 2.000 and 2.500 microns (For other options, consult)
Optionally the filter may be manufactured for use solar energy, batteries, etc….